詢問skill 函數問題

joe80502

請教  是否有函數可以抓到點選Pin 的資料?

感謝大大幫解答

vivienluo

你直接获取pin的DBID就行了。dbid下可获取pin的所以属性。

joe80502

我知道用axlGetSelSet 可以抓到ID  但是要先按Show Element 的情況下

我只想要滑鼠點一下PIN 高亮的情況下 去抓取ID  但是用axlGetSelSet 抓不到

還有其他辦法能抓ID嗎??

vivienluo

1. axlClearSelSet()
   
2. axlSetFindFilter(?enabled '("NOALL" "PINS") ?onButtons '("NOALL" "PINS"))
   
3. axlSingleSelectPoint()
   
4. PinDbid = car(axlGetSelSet())

复制代码

获取到的DBID可通过->?来获取属性，或者->??来获取属性和属性值。
如下：

1. Skill > PinDbid->?
   
2. (fixedByTestPoint parentGroups pads definition parent
   
3.     relRotation relxy rotation mirrorType startEnd
   
4.     readOnly prop functionPins component testPoint
   
5.     isThrough isMirrored isMech isExploded branch
   
6.     net bBox xy number name
   
7.     objType use
   
8. )

复制代码

1. Skill > PinDbid->??
   
2. (use "UNSPEC" objType "pin" bBox
   
3.     ((5161.0 3283.32)
   
4.         (5189.0 3317.32)
   
5.     ) net dbid:333263200 branch dbid:341335440
   
6.     isExploded nil isMech nil component
   
7.     dbid:333154784 functionPins
   
8.     (dbid:336347088) prop nil
   
9.     readOnly t pads
   
10.     (pad:144351952 pad:144351928 pad:144351904 pad:144351880 pad:144351856
    
11.         pad:144351832 pad:144351808 pad:144351784 pad:144351760 pad:144351736
    
12.         pad:144351712 pad:144351688 pad:144351664 pad:144351640 pad:144351616
    
13.         pad:144351592 pad:144351568 pad:144351544 pad:144351520 pad:144351496
    
14.         pad:144351472 pad:144351448 pad:144351424 pad:144351400 pad:144351376
    
15.         pad:144351352 pad:144351328 pad:144351304 pad:144351280 pad:144351256
    
16.     ) parentGroups
    
17.     nil fixedByTestPoint t isThrough nil
    
18.     name "SMD28_22" testPoint nil xy
    
19.     (5175.0 3300.32) startEnd
    
20.     ("ETCH/TOP" "ETCH/TOP") rotation 90.0
    
21.     relxy
    
22.     (-19.68 0.0) relRotation 0.0 parent
    
23.     dbid:333209432 number "1" mirrorType "NO"
    
24.     isMirrored nil definition dbid:206766720
    
25. )

复制代码

messy11

厉害了。明天再来学习